 |
TOP LABELLING CASE STUDY |
 |
| Details |
To apply a display label onto the top surface of biscuit tins to a high accuracy & quality of finish |
 |
| Details |
To apply a label to the recess of a mould plastic lid. |
 |
| Details |
To apply a price point label at high speed onto a greeting card at the outfeed of an offline fold |
 |
| Details | To apply a single label to the top face of the wrapped packs as they exit the wrapping system. The system incorporated a special vertically mounted 'belt facing' photocell to accommodate the thin packs |
 |
| Details | To take the lids from manually placed stack in the systems in-feed hopper and to feed them singularly through the labelling station. Once labelled the lids are then collated into an out-feed stack for manual removal. |
 |
| Details | To apply a special label over the top of a 'breather' hole in the outer packaging film. To accommodate the unusual shaped product, the system incorporated specially machined 'pucks' to hold the product stable. The shrunk-wrapped packs are dropped onto the in-feed table for manual loading, automatically labelled & auto-ejected onto the out-feed packing table. Due to the adhesive used, the label applicator had to be especially adapted to avoid pre dispensing |
 |
| Details | 1,To apply a range of display labels to high accuracy in various positions on the pack. Top edge, top corner, middle 2, To apply a label to the front face & Wraparound onto the rear face using a special 'pre-dispensed' technique |
 |
| Details | 1,To apply a range of display labels to high accuracy in various positions on the pack., Top edge, Top Corner, Middle 2, To apply a label to the front face & Wraparound onto the rear face using a special 'pre-dispensed technique |
 |
| Details | To apply a single label to the upper face of the cassettes as they pass on an existing conveyor |
 |