The high-performance suction wheel feeder is a feeder with sheet pick-up from above. Simple, fast format adjustment. Digital electronic sheet distance regulation. Feeds independent of paper thickness, antistatic alignment. Own air supply via vacuum pump. Antistatic brushes at the outfeed (counting), double-sheet control. Options: Non-Stop magazining, buffer rake. The sheet pick-up from above ensures a safe separation of thin and surface-sensitive products. The magazine weight does not affect the separation. This allows a high degree of magazine loading. Particulary suitable for integration in paper converting machines and wrapping lines.
	Technical data
	HSW with feeding width 300   Formats: 300 x 210 mm (DIN A4) longitudinalement / transversal   Speed /feeding performance (continuous mode) / (depending on the format): Max. 220 m/min. / up to max. 500 products/min. (continuously)   Product passage: Min. 70 g/m², Max. 170 g/m²   Magazine loading (depending on the product): up to approx. 5.500 sheets / 80 g/m²   Drive: Suction roll via DC-servo-motor, infinitely controllable stack table via spur geared motor   Control: PLC control SIMATEC S7 with control panel OP 7 with functions for number of pieces, automatic mode, set-up mode and manuel mode, self-diagnostic, fault message etc.   Supply voltage: Power input: 3 x 400 V / 50 Hz, 2.500 VA   Compressed-air connection: Autonomous mode, own vacuum pump + air pressure connection Seperate air supply connection for stacking rake (6 bar)   Dimensions (W x D x H) / Weight: approx. 1.680 x 800 x 1.760 mm (incl. buffer rake)